Labels:bird | book | bulletin board | crt screen | monitor | person | poster | reckoner | sky | trade name OCR: Design of the PE/2 Chassis PE/2 Backplane Layout Figure R PE2BUS RAVE 99 CO J15 REY 1-J20 GENEVE Connector This connector is used to connect the GENEVE computer to the PE/2 chassis. It provides connections for the keyboard, Video, and Reset signals. When used with the PE/2 this connection 15 optional. It is required if the KEYLOCK and RESET switches are to be oper- ational. When used with the PE/2-C in Dual Processor Mode, the GENEVE Keyboard, Video, and Reset signals are routed to the main swi tching logic which determines which computer has access to the KEYBOARD and MONITOR 2-J19 Card Enable Jumper This jumper is used to select whether the card in slot 6 is a COMMON card or, is use with a TI-99/4A only Single computer operation Vt/66-LL) or GENEVE only) requires that this jumper be in t ...
